1. Automatic curing control system, for single or dual zone control with 10-inch chart recorder
   
   
2. Records curing duration and temperature over 24 hours from 0°F to 200°F in 1°F increments
   
   
3. Controls the curing cycle from preset, ramp and soak to cool down
   
   
4. Curing temperature and duration can be controlled via a digital screen and soft-touch buttons
   
   
5. 10-inch circular chart paper must be renewed daily
   
   
6. 100 paper charts and two (2) ink pens are enclosed
   
   
7. Controller/recorder unit may be located in the vicinity of the vapor generator or located remotely, in an office or quality control laboratory
   
   
8. During curing cycle, the actual and set-point temperatures display alternately on the LED screen
   
   
9. Economical means of controlling and recording curing data
   
   

AutoCure™ - Concrete Curing Controls:
Timer & Thermostat Controls  .  Millenium Curing Profile Control  .  MRC 7000 Controller & Chart Recorder
Siemens S7 300  .  Remote Display & Control  .  Curing Sensors  .  Curing Data Recording
Data Loggers  .  Vapor Control Valve and Distribution Pipe